Production Floor Supervisor
Description

Position Summary

The Manufacturing Floor Supervisor is the frontline leader responsible for converting A1J Technologies' daily production priorities into safe, compliant, and predictable shop-floor execution. Reporting to the Production Manager, this role directly leads machinists and operators within an assigned manufacturing area and is accountable for safety, quality, schedule attainment, labor performance, productivity, ERP/MRP transaction discipline, housekeeping, and employee accountability.


As A1J transitions from a small job-shop operating model into a disciplined, scalable supplier serving commercial, aerospace, and defense customers, the Manufacturing Floor Supervisor is expected to establish consistent daily operating routines, enforce standardized work and traveler requirements, develop employees, surface constraints early, and build a culture in which quality and compliance are part of the manufacturing process rather than inspected in at the end.


Position Details

Reports to: Process Area Manager

Incumbent: TBD.

Direct reports: Assigned CNC machinists, machine operators, and other production employees, as designated.

Bridges: Planning, Quality, Engineering, and CNC Programming.

Key peers: Other Production Floor Supervisors and manufacturing area leads.


Scope of the Role

Inside the role

  • Direct daily shop-floor execution of approved job priorities and assign qualified employees to machines and operations within the assigned area.
  • Confirm shift readiness, staffing, machine availability, safe working conditions, and communication of expected production output.
  • Monitor output, labor efficiency, WIP flow, machine status, and schedule attainment; escalate constraints and execute approved recovery actions.
  • Enforce approved travelers, revision-controlled instructions, required first-piece and in-process inspection checkpoints, and product traceability.
  • Ensure accurate JobBoss/ERP job-on/job-off, labor, quantity, scrap, and operation-completion transactions and reliable shift pass-downs.
  • Coach employees, support training and skills development, reinforce attendance and conduct expectations, and maintain safety and 5S discipline.
  • Stop and segregate suspected nonconforming work and coordinate timely escalation to Quality and Production management.

Outside the role

  • Defining changes to the master production schedule, customer promise dates, or overall shop loading (Planning & Production Control and Operations leadership).
  • Developing or approving manufacturing routings, CNC programs, setup methods, tooling or fixture designs (Manufacturing Engineering and CNC Programming).
  • Approving deviations from drawings, specifications or controlled manufacturing processes (authorized Engineering and Quality functions).
  • Inspection results, nonconformance disposition, quality holds, first article approval and final product release (Quality); Manufacturing must respect all quality holds.
  • Ownership of equipment repairs, preventive-maintenance programs, facilities infrastructure or capital equipment approval (Facilities & Maintenance and authorized leadership).
  • Independent reassignment of work outside approved priorities or bypassing required safety, quality, traceability or process controls to recover schedule.

Primary Responsibilities

1. Daily Production Execution & Schedule Attainment

  • · Execute the daily and shift-level production priorities established by the Production Manager and Planning & Production Control.
  • · Assign employees to machines and jobs based on priority, skill, equipment availability, and production requirements.
  • · Conduct shift-start communication to confirm priorities, staffing, safety concerns, quality issues, machine status, and expected output.
  • · Monitor work throughout the shift and take timely action when jobs fall behind planned progress or expected cycle/output performance.
  • · Identify and escalate material shortages, programming issues, tooling problems, machine downtime, inspection delays, documentation issues, and other constraints before they jeopardize customer commitments.
  • · Maintain accurate shift pass-downs so incomplete work, risks, machine status, and next actions are visible to the following shift and Production Manager.

2. Frontline Leadership & Employee Accountability

  • · Provide direct day-to-day leadership, coaching, direction, and accountability for machinists and operators in the assigned area.
  • · Set clear expectations for safety, quality, attendance, productivity, job reporting, housekeeping, and professional conduct.
  • · Monitor employee performance using objective production data and provide timely coaching, recognition, and corrective feedback.
  • · Address attendance, conduct, performance, and policy issues consistently in partnership with the Production Manager and Human Resources.
  • · Develop employee capability through cross-training, skills matrices, qualification tracking, and identification of training needs.
  • · Promote a culture of ownership in which employees understand the requirements of the job, expected output, and their responsibility for product conformity.

3. Quality, AS9100 & Defense Manufacturing Discipline

  • · Ensure employees manufacture products in accordance with current approved drawings, travelers, routings, work instructions, specifications, inspection requirements, and customer flow-downs.
  • · Verify required first-piece and in-process inspections are completed before work proceeds when approval is required.
  • · Ensure suspected nonconforming products are stopped, identified, segregated, and immediately escalated to Quality in accordance with established procedures.
  • · Reinforce product safety, configuration awareness, traceability, and controlled-document requirements applicable to aerospace and defense manufacturing.
  • · Participate in root-cause corrective action activities and ensure assigned production corrective actions are implemented and sustained.
  • · Never direct or permit employees to bypass quality, inspection, traveler, safety, or controlled-process requirements to recover schedule.

4. ERP/MRP, Traveler & Labor Reporting Discipline

  • · Enforce accurate and timely job-on/job-off activity, labor reporting, quantity reporting, scrap reporting, and operation completion in the ERP/MRP system.
  • · Ensure employees are working to the correct job, operation, revision, quantity, and authorized manufacturing documentation.
  • · Ensure travelers remain with product and accurately reflect quantity, operation status, required sign-offs, and movement between operations.
  • · Perform routine floor verification of system status versus actual physical WIP and promptly correct or escalate discrepancies.
  • · Use available production data to identify excessive hours, stalled jobs, abnormal cycle performance, unreported labor, and other execution issues.

5. KPI Management & Daily Accountability

  • · Monitor department performance against defined KPIs and review results with the Production Manager.
  • · Use visual management and daily accountability routines to communicate performance, constraints, priorities, and corrective actions to employees.
  • · Take ownership of assigned recovery actions and ensure actions have clear owners and completion dates.
  • · Escalate adverse trends early rather than allowing missed output, quality issues, or system inaccuracies to accumulate.

6. Standard Work, Lean & Continuous Improvement

  • · Enforce standardized work, 5S, workplace organization, and established production procedures within the assigned area.
  • · Identify recurring waste, bottlenecks, setup delays, excessive movement, rework, and other opportunities to improve flow and productivity.
  • · Partner with Manufacturing Engineering and CNC Programming on process improvements, setup reduction, tooling, work holding, manufacturability, and production readiness.
  • · Engage machinists and operators in practical continuous improvement activities and ensure approved improvements are incorporated into standard work.
  • · Help reduce dependence on tribal knowledge by ensuring repeatable practices are documented, trained, and followed.

7. New Product Introduction & Production Readiness

  • · Support first-run and NPI activities by confirming operators, machines, tooling, fixtures, programs, documentation, and inspection support are ready for production.
  • · Provide timely shop-floor feedback to Production, Manufacturing Engineering, CNC Programming, and Quality when process or manufacturability issues are identified.
  • · Ensure lessons learned from first-piece inspection, FAI, scrap, rework, and setup issues are communicated and incorporated into repeat production where applicable.

8. Safety, Equipment & Workplace Discipline

  • · Maintain a safe, clean, organized, and professional work area and always enforce company safety requirements.
  • · Conduct required safety communication and immediately address unsafe conditions, unsafe behavior, or potential hazards.
  • · Escalate equipment problems promptly and coordinate with Facilities & Maintenance to minimize production disruption.
  • · Ensure machines, work areas, tools, fixtures, and material are maintained in an orderly condition consistent with 5S expectations.
  • · Support incident investigations and implement assigned corrective actions.

9. Cross-Functional Coordination

  • · Communicate production status, staffing needs, constraints, and recovery actions to the Production Manager using fact-based information.
  • · Coordinate with Planning & Production Control, Manufacturing Engineering, CNC Programming, Quality, Supply Chain & Logistics, and Facilities & Maintenance to resolve shop-floor issues.
  • · Support customer, internal, and certification audits by ensuring employees can demonstrate compliance with approved manufacturing processes.
  • · Participate in production, recovery, quality, NPI, and operational meetings as required.

Key Performance Indicators (KPIs)

The Production Floor Supervisor will be measured by:

  • · Production Schedule Attainment - completion of assigned operations/jobs to the approved daily and weekly production plan.
  • · Labor Efficiency / Productivity - actual labor performance and output versus established plan or standard, where available.
  • · First-Pass Yield - production accepted without avoidable rework, repair, or repeat processing.
  • · Scrap & Rework - quantity, cost, labor impact, and recurrence of manufacturing related defects within the assigned area.
  • · ERP Transaction Compliance - accurate and timely job-on/job-off, labor, quantity, scrap, and operation-completion reporting.
  • · WIP Flow & Aging - timely movement of work through the assigned area and escalation of stalled jobs or excessive queue time.
  • · Overtime Effectiveness - measurable output or schedule recovery achieved from approved overtime.
  • · Safety & 5S Performance - safety compliance, corrective-action closure, housekeeping, and workplace organization.
  • · Attendance & Workforce Readiness - effective staffing, attendance management, cross-training, and skill coverage for scheduled work.
  • · Corrective Action Closure - timely completion and sustained effectiveness of assigned production, quality, safety, and operational actions.

  

Work Environment

  • Primarily manufacturing-floor based with regular interaction with CNC equipment, tooling, production personnel, and support      departments.
  • Requires standing and walking for extended periods throughout the manufacturing facility and occasional lifting of up to 25      pounds.
  • Must be able to work in a machine-shop environment with normal exposure to noise, coolant, oils, and manufacturing activity      while using required PPE.
  • May require extended hours, overtime, weekend support, or alternate-shift coverage based on production and customer      requirements.

Benefits

  • Medical Insurance
  • Dental Insurance
  • Vision Insurance
  • Life Insurance
  • Paid Time Off
  • 401(k) Retirement Plan
  • 401(k) Employer Match
Requirements

Qualifications

  • 5+ years of hands-on experience in CNC machining, precision manufacturing, or a comparable complex manufacturing environment.
  • 3+ years of lead, supervisory, or frontline leadership experience with direct responsibility for machinists, operators, or production employees.
  • Strong practical knowledge of machining and shop-floor execution, including setups, tooling, work holding, production flow, and common manufacturing constraints.
  • Ability to read and interpret engineering drawings, travelers, routings, work instructions, and manufacturing requirements.
  • Demonstrated ability to assign work, manage priorities, coach employees, address performance issues, and maintain accountability during changing production demands.
  • Working knowledge of ERP/MRP shop-floor transactions, labor reporting, WIP status, and production data accuracy.
  • Ability to use production metrics and factual shop-floor information to identify problems, escalate risks, and drive actions to closure.
  • Strong communication and interpersonal skills with the ability to work effectively with production employees and cross-functional support teams.
  • Basic proficiency with Microsoft Office and manufacturing information systems.
  • Ability and willingness to maintain a consistent physical presence on the manufacturing floor and support shift requirements.
  • U.S. person as defined by applicable ITAR regulations

Preferred Qualifications

  • Experience in aerospace, defense, commercial aerospace, or another highly regulated precision manufacturing environment.
  • Working knowledge of AS9100 and ISO 9001 manufacturing requirements.
  • Experience supporting first-piece inspection, AS9102 First Article Inspection (FAI), nonconformance control, and root-cause corrective action.
  • Experience with high-mix, low-to-medium-volume CNC production and changing customer priorities.
  • Experience implementing or sustaining Lean manufacturing practices such as 5S, standard work, visual management, daily accountability, setup reduction, and continuous improvement.
  • Experience using a manufacturing ERP/MRP system.
  • Experience with skills matrices, cross-training, employee qualification, and structured shift pass-downs.